Rigol DL3000 Programming Guide

Chapter 1 Programming Overview RIGOL
DL3000 Programming Guide 1-9
Table 1-3 Definitions for the bits in the status byte register and the decimal value that corresponds to the
binary-weighted value
Bit
Weight
Name
Description
0 Not used Not used This bit is always set to 0.
1 Not used Not used This bit is always set to 0.
2 4 EQ
Error queue. One or more errors were found in the
error queue.
3 8
Questionable status
summary
One or multiple bits of the questionable status
register has/have been set (To enable the bit, refer
to the :STATus:QUEStionable:ENABle command).
4 16 Message available A message is available in the output buffer.
5 32
Standard event status
summary
One or multiple bits of the standard event status
register has/have been set (To enable the bit, refer
to the *ESE command).
6 64 Master summary
One or multiple bits of the status byte register
has/have been set.
7 128 Operation status summary
One or multiple bits of the operation status register
has/have been set (To enable the bit, refer to
the :STATus:OPERation:ENABle command).

Rigol DL3000 Specifications

General

Brand	Rigol
Model	DL3000
Category	Measuring Instruments
Language	English