Rigol DL3000 Programming Guide

RIGOL Chapter 2 Command System
2-22 DL3000 Programming Guide
the maximum value of the load's regulated current; and the parameter "DEFault"
indicates querying the default value of the load's regulated current.
Return
Format
The query returns a real number.
Example :SOUR:CURR:LEV:IMM 3 /*Sets the load's regulated current in CC mode to be 3 A.*/
:SOUR:CURR:LEV:IMM? /*Queries the load's regulated current set in CC mode.*/
[:SOURce]:CURRent:RANGe
Syntax [:SOURce]:CURRent:RANGe {<value>|MINimum|MAXimum|DEFault}
[:SOURce]:CURRent:RANGe? [MINimum|MAXimum|DEFault]
Description Sets the current range in CC mode and transient operation mode to be a high range or a
low one.
Queries the current range set in CC mode and transient operation mode.
Remarks  The default range is a low range.
 In the setting command, the parameter "MINimum" indicates setting a low range; the
parameter "MAXimum" indicates setting a high range; and the parameter "DEFault"
indicates setting the default range.
 In the query command, the parameter "MINimum" indicates querying a low range;
the parameter "MAXimum" indicates querying a high range; and the parameter
"DEFault" indicates querying the default range.
Return
Format
The query returns a real number.
Example :SOUR:CURR:RANG 60 /*Sets the current range in CC mode to be 60 A (a high range).*/
:SOUR:CURR:RANG? /*Queries the current range set in CC mode.*/
[:SOURce]:CURRent:SLEW
Syntax [:SOURce]:CURRent:SLEW[:BOTH] {<value>|MINimum|MAXimum|DEFault}
[:SOURce]:CURRent:SLEW[:BOTH]? [MINimum|MAXimum|DEFault]
Description Sets the rising and falling slew rate in CC mode.
Queries the rising and falling rate set in CC mode.
Remarks  The rising and falling rate of the load set in CC mode are called the slew rate of the
load in CC mode. Its unit is A/
μs.
 In the setting command, the parameter "MINimum" indicates setting the minimum
rate; the parameter "MAXimum" indicates setting the maximum rate; and the
parameter "DEFault" indicates setting the default rate.
 In the query command, the parameter "MINimum" indicates querying the minimum
rate; the parameter "MAXimum" indicates querying the maximum rate; and the
parameter "DEFault" indicates querying the default rate.
Return
Format
The query returns a real number.
Example :SOUR:CURR:SLEW:BOTH 0.5 /*Sets the slew rate in CC mode to be 0.5 A/μs.*/
:SOUR:CURR:SLEW:BOTH? /*Queries the slew rate set in CC mode.*/

Rigol DL3000 Specifications

General

Brand	Rigol
Model	DL3000
Category	Measuring Instruments
Language	English