Rigol DL3000 Programming Guide

RIGOL Chapter 2 Command System
2-30 DL3000 Programming Guide
[:SOURce]:VOLTage:VLIMt
Syntax [:SOURce]:VOLTage:VLIMt {<value>|MINimum|MAXimum|DEFault}
[:SOURce]:VOLTage:VLIMt? [MINimum|MAXimum|DEFault]
Description Sets the voltage limit in CV mode.
Queries the voltage limit set in CV mode.
Remarks  The voltage limit refers to the upper limit of the voltage working in CV mode. The unit
is V.
 In the setting command, the parameter "MINimum" indicates setting the minimum
voltage; the parameter "MAXimum" indicates setting the maximum voltage; and the
parameter "DEFault" indicates setting the default voltage limit.
 In the query command, the parameter "MINimum" indicates querying the minimum
voltage; the parameter "MAXimum" indicates querying the maximum voltage; and the
parameter "DEFault" indicates querying the default voltage limit value.
Return
Format
The query returns a real number.
Example
:SOUR:VOLT:VLIM 5 /*Sets the voltage limit in CV mode to be 5 V.*/
:SOUR:VOLT:VLIM? /*Queries the voltage limit set in CV mode.*/
[:SOURce]:VOLTage:ILIMt
Syntax [:SOURce]:VOLTage:ILIMt {<value>|MINimum|MAXimum|DEFault}
[:SOURce]:VOLTage:ILIMt? [MINimum|MAXimum|DEFault]
Description Sets the current limit in CV mode.
Queries the current limit set in CV mode.
Remarks  The current limit refers to the upper limit of the current working in CV mode. Its unit
is A.
 In the setting command, the parameter "MINimum" indicates setting the minimum
current; the parameter "MAXimum" indicates setting the maximum current; and the
parameter "DEFault" indicates setting the default current limit value.
 In the query command, the parameter "MINimum" indicates querying the minimum
current; the parameter "MAXimum" indicates querying the maximum current; and the
parameter "DEFault" indicates querying the default current limit value.
Return
Format
The query returns a real number.
Example
:SOUR:VOLT:ILIM 5 /*Sets the current limit in CV mode to be 5 A.*/
:SOUR:VOLT:ILIM? /*Queries the current limit set in CV mode.*/
[:SOURce]:RESistance[:LEVel][:IMMediate]
Syntax [:SOURce]:RESistance[:LEVel][:IMMediate] {<value>|MINimum|MAXimum|DEFault}
[:SOURce]:RESistance[:LEVel][:IMMediate]? [MINimum|MAXimum|DEFault]
Description Sets the load resistance in CR mode.
Queries the load resistance set in CR mode.

Rigol DL3000 Specifications

General

Brand	Rigol
Model	DL3000
Category	Measuring Instruments
Language	English