Rigol DL3000 Programming Guide

Chapter 2 Command System RIGOL
DL3000 Programming Guide 2-43
OCP mode. The default unit for the value is A.
 In the setting command, the parameter "MINimum" indicates setting the minimum
value of the maximum current; the parameter "MAXimum" indicates setting the
maximum value of the maximum current; and the parameter "DEFault" indicates
setting the default value of the maximum current.
 In the query command, the parameter "MINimum" indicates querying the minimum
value of the maximum current; the parameter "MAXimum" indicates querying the
maximum value of the maximum current; and the parameter "DEFault" indicates
querying the default value of the maximum current.
Return
Format
The query returns a real number.
Example
:SOUR:OCP:IMAX 10 /*Sets the maximum current in OCP mode to be 10 A.*/
:SOUR:OCP:IMAX? /*Queries the maximum current in OCP mode.*/
[:SOURce]:OCP:IMIN
Syntax [:SOURce]:OCP:IMIN {<value>|MINimum|MAXimum|DEFault}
[:SOURce]:OCP:IMIN? [MINimum|MAXimum|DEFault]
Description Sets the minimum current in OCP mode.
Queries the minimum current in OCP mode.
Remarks  The minimum current is called the minimum value of the protection current in the
OCP mode. The default unit for the value is A.
 In the setting command, the parameter "MINimum" indicates setting the minimum
value of the minimum current; the parameter "MAXimum" indicates setting the
maximum value of the minimum current; and the parameter "DEFault" indicates
setting the default value of the minimum current.
 In the query command, the parameter "MINimum" indicates querying the minimum
value of the minimum current; the parameter "MAXimum" indicates querying the
maximum value of the minimum current; and the parameter "DEFault" indicates
querying the default value of the minimum current.
Return
Format
The query returns a real number.
Example
:SOUR:OCP:IMIN 1 /*Sets the minimum current in OCP mode to be 1 A.*/
:SOUR:OCP:IMIN? /*Queries the minimum current in OCP mode.*/
[:SOURce]:OCP:VOCP
Syntax [:SOURce]:OCP:VOCP {<value>|MINimum|MAXimum|DEFault}
[:SOURce]:OCP:VOCP? [MINimum|MAXimum|DEFault]
Description Sets the protection voltage in OCP mode.
Queries the protection voltage in OCP mode.
Remarks  The default unit for the protection voltage is V.
 In the setting command, the parameter "MINimum" indicates setting the minimum
protection voltage; the parameter "MAXimum" indicates setting the maximum
protection voltage; and the parameter "DEFault" indicates setting the default
protection voltage.

Rigol DL3000 Specifications

General

Brand	Rigol
Model	DL3000
Category	Measuring Instruments
Language	English