Rigol DL3000 - [:Source]:Opp:pstep; [:Source]:Opp:pdelaystep; [:Source]:Opp:pmax

RIGOL Chapter 2 Command System
2-46 DL3000 Programming Guide
[:SOURce]:OPP:PSTep
Syntax [:SOURce]:OPP:PSTep {<value>|MINimum|MAXimum|DEFault}
[:SOURce]:OPP:PSTep? [MINimum|MAXimum|DEFault]
Description Sets the step power in OPP mode.
Queries the step power in OPP mode.
Remarks  The step power is called the step value of the power in OP
P mode. The default unit
is W.
 In the setting command, the parameter "MINimum" indicates setting the minimum
step power; the parameter "MAXimum" indicates setting the maximum step power;
and the parameter "DEFault" indicates setting the default step power.
 In the query command, the parameter "MINimum" indicates querying the minimum
step power; the parameter "MAXimum" indicates querying the maximum step
power; and the parameter "DEFault" indicates querying the default step power.
Return
Format
The query returns a real number.
Example
:SOUR:OPP:PST 1 /*Sets the step power in OPP mode to be 1 W.*/
:SOUR:OPP:PST? /*Queries the step power in OPP mode.*/
[:SOURce]:OPP:PDELaystep
Syntax [:SOURce]:OPP:PDELaystep {<value>|MINimum|MAXimum|DEFault}
[:SOURce]:OPP:PDELaystep? [MINimum|MAXimum|DEFault]
Description Sets the delay time of the step power in OPP mode.
Queries the delay time of the step power in OPP mode.
Remarks  The default unit for the delay time is ms.
 In the setting command, the parameter "MINimum" indicates setting the minimum
delay time; the parameter "MAXimum" indicates setting the maximum delay time;
and the parameter "DEFault" indicates setting the default delay time.
 In the query command, the parameter "MINimum" indicates querying the minimum
delay time; the parameter "MAXimum" indicates querying the maximum delay time;
and the parameter "DEFault" indicates querying the default delay time.
Return
Format
The query returns a real number.
Example
:SOUR:OPP:PDEL 500 /*Sets the delay time of the step power in OPP mode to be
500 ms.*/
:SOUR:OPP:PDEL? /*Queries the delay time of the step power in OPP mode.*/
[:SOURce]:OPP:PMAX
Syntax [:SOURce]:OPP:PMAX {<value>|MINimum|MAXimum|DEFault}
[:SOURce]:OPP:PMAX? [MINimum|MAXimum|DEFault]
Description Sets the maximum power in OPP mode.
Queries the maximum power in OPP mode.
Remarks
 The maximum power is called the maximum value of the protection power in the OPP