Rigol DL3000 Programming Guide

RIGOL Chapter 2 Command System
2-32 DL3000 Programming Guide
Return
Format
The query returns a real number.
Example
:SOUR:RES:VLIM 5 /*Sets the voltage limit in CR mode to be 5 V.*/
:SOUR:RES:VLIM? /*Queries the voltage limit set in CR mode.*/
[:SOURce]:RESistance:ILIMt
Syntax [:SOURce]:RESistance:ILIMt {<value>|MINimum|MAXimum|DEFault}
[:SOURce]:RESistance:ILIMt? [MINimum|MAXimum|DEFault]
Description Sets the current limit in CR mode.
Queries the current limit set in CR mode.
Remarks  The current limit refers to the upper limit of the current working in CR mode. Its unit
is A.
 In the setting command, the parameter "MINimum" indicates setting the minimum
current; the parameter "MAXimum" indicates setting the maximum current; and the
parameter "DEFault" indicates setting the default current limit value.
 In the query command, the parameter "MINimum" indicates querying the minimum
current; the parameter "MAXimum" indicates querying the maximum current; and the
parameter "DEFault" indicates querying the default current limit value.
Return
Format
The query returns a real number.
Example
:SOUR:RES:ILIM 5 /*Sets the current limit in CR mode to be 5 A.*/
:SOUR:RES:ILIM? /*Queries the current limit set in CR mode.*/
[:SOURce]:POWer[:LEVel][:IMMediate]
Syntax [:SOURce]:POWer[:LEVel][:IMMediate] {<value>|MINimum|MAXimum|DEFault}
[:SOURce]:POWer[:LEVel][:IMMediate]? [MINimum|MAXimum|DEFault]
Description Sets the load power in CP mode.
Queries the load power set in CP mode.
Remarks  The load power refers to the constant power value in CP mode. The unit of power is
W.
 In the setting command, the parameter "MINimum" indicates setting the minimum
load power; the parameter "MAXimum" indicates setting the maximum load power;
and the parameter "DEFault" indicates setting the default load power.
 In the query command, the parameter "MINimum" indicates querying the minimum
load power; the parameter "MAXimum" indicates querying the maximum load power;
and the parameter "DEFault" indicates querying the default load power.
Return
Format
The query returns a real number.
Example
:SOUR:POW:LEV:IMM 5 /*Sets the load power in CP mode to be 5 W.*/
:SOUR:POW:LEV:IMM? /*Queries the load resistance set in CP mode.*/

Rigol DL3000 Specifications

General

Brand	Rigol
Model	DL3000
Category	Measuring Instruments
Language	English