Rigol DL3000 - Status Commands; Status:questionable:condition

Chapter 2 Command System RIGOL
DL3000 Programming Guide 2-9
:STATus Commands
Command List:
 :STATus:QUEStionable:CONDition?
 :STATus:QUEStionable:ENABle
 :STATus:QUEStionable[:EVENt]?
 :STATus:PRESet
 :STATus:OPERation:CONDition?
 :STATus:OPERation:ENABle
 :STATus:OPERation[:EVENt]?
:STATus:QUEStionable:CONDition?
Syntax
:STATus:QUEStionable:CONDition?
Description
Queries the condition register of the questionable status register.
Remarks The query returns a decimal value. It corresponds to the binary-weighted sum of all the
bits in the register. The definitions for the bits in the questionable status register and the
decimal value that corresponds to the binary-weighted value are shown in Table 1-1.
Return
Format
The query returns a decimal value. It corresponds to the binary-weighted sum of all the
bits in the register. For example, the query returns 1.
Example :STAT:QUES:COND? /*Queries the condition register of the questionable status register.
The query returns 1.*/