Rigol DL3000 Programming Guide

RIGOL Chapter 2 Command System
2-42 DL3000 Programming Guide
[:SOURce]:OCP:ISTep
Syntax [:SOURce]:OCP:ISTep {<value>|MINimum|MAXimum|DEFault}
[:SOURce]:OCP:ISTep? [MINimum|MAXimum|DEFault]
Description Sets the step current in OCP mode.
Queries the step current in OCP mode.
Remarks  The step current is called the step value of the current in OCP mode. The default unit
is A.
 In the setting command, the parameter "MINimum" indicates setting the minimum
step current; the parameter "MAXimum" indicates setting the maximum step
current; and the parameter "DEFault" indicates setting the default step current.
 In the query command, the parameter "MINimum" indicates querying the minimum
step current; the parameter "MAXimum" indicates querying the maximum step
current; and the parameter "DEFault" indicates querying the default step current.
Return
Format
The query returns a real number.
Example
:SOUR:OCP:IST 1 /*Sets the step current in OCP mode to be 1 A.*/
:SOUR:OCP:IST? /*Queries the step current in OCP mode.*/
[:SOURce]:OCP:IDELaystep
Syntax [:SOURce]:OCP:IDELaystep {<value>|MINimum|MAXimum|DEFault}
[:SOURce]:OCP:IDELaystep? [MINimum|MAXimum|DEFault]
Description Sets the delay time of the step current in OCP mode.
Queries the delay time of the step current in OCP mode.
Remarks  The default unit for the delay time is ms.
 In the setting command, the parameter "MINimum" indicates setting the minimum
delay time; the parameter "MAXimum" indicates setting the maximum delay time;
and the parameter "DEFault" indicates setting the default delay time.
 In the query command, the parameter "MINimum" indicates querying the minimum
delay time; the parameter "MAXimum" indicates querying the maximum delay time;
and the parameter "DEFault" indicates querying the default delay time.
Return
Format
The query returns a real number.
Example
:SOUR:OCP:IDEL 500 /*Sets the delay time of the step current in OCP mode to
be 500 ms.*/
:SOUR:OCP:IDEL? /*Queries the delay time of the step current in OCP mode.*/
[:SOURce]:OCP:IMAX
Syntax [:SOURce]:OCP:IMAX {<value>|MINimum|MAXimum|DEFault}
[:SOURce]:OCP:IMAX? [MINimum|MAXimum|DEFault]
Description Sets the maximum current in OCP mode.
Queries the maximum current in OCP mode.
Remarks
 The maximum current is called the maximum value of the protection current in the

Rigol DL3000 Specifications

General

Brand	Rigol
Model	DL3000
Category	Measuring Instruments
Language	English