Rigol DL3000 Programming Guide

Chapter 2 Command System RIGOL
DL3000 Programming Guide 2-33
[:SOURce]:POWer:VLIMt
Syntax [:SOURce]:POWer:VLIMt {<value>|MINimum|MAXimum|DEFault}
[:SOURce]:POWer:VLIMt? [MINimum|MAXimum|DEFault]
Description Sets the voltage limit in CP mode.
Queries the voltage limit set in CP mode.
Remarks  The voltage limit refers to the upper limit of the voltage working in CP mode. The unit
is V.
 In the setting command, the parameter "MINimum" indicates setting the minimum
voltage; the parameter "MAXimum" indicates setting the maximum voltage; and the
parameter "DEFault" indicates setting the default voltage limit.
 In the query command, the parameter "MINimum" indicates querying the minimum
voltage; the parameter "MAXimum" indicates querying the maximum voltage; and the
parameter "DEFault" indicates querying the default voltage limit value.
Return
Format
The query returns a real number.
Example
:SOUR:POW:VLIM 5 /*Sets the voltage limit in CP mode to be 5 V.*/
:SOUR:POW:VLIM? /*Queries the voltage limit set in CP mode.*/
[:SOURce]:POWer:ILIMt
Syntax [:SOURce]:POWer:ILIMt {<value>|MINimum|MAXimum|DEFault}
[:SOURce]:POWer:ILIMt? [MINimum|MAXimum|DEFault]
Description Sets the current limit in CP mode.
Queries the current limit set in CP mode.
Remarks  The current limit refers to the upper limit of the current working in CP mode. Its unit
is A.
 In the setting command, the parameter "MINimum" indicates setting the minimum
current; the parameter "MAXimum" indicates setting the maximum current; and the
parameter "DEFault" indicates setting the default current limit value.
 In the query command, the parameter "MINimum" indicates querying the minimum
current; the parameter "MAXimum" indicates querying the maximum current; and the
parameter "DEFault" indicates querying the default current limit value.
Return
Format
The query returns a real number.
Example
:SOUR:POW:ILIM 5 /*Sets the current limit in CP mode to be 5 A.*/
:SOUR:POW:ILIM? /*Queries the current limit set in CP mode.*/
[:SOURce]:LIST:MODE
Syntax [:SOURce]:LIST:MODE {CC|CV|CR|CP}
[:SOURce]:LIST:MODE?
Description Sets the running mode of the load in List operation.
Queries the running mode of the load set in List operation.
Remarks
 In list operation mode, you can perform the complex

Rigol DL3000 Specifications

General

Brand	Rigol
Model	DL3000
Category	Measuring Instruments
Language	English