RIGOL
User’s Guide for DM3058
Connection
Different Sensor has different connecting ways. As the Current Sensor, Resistance
Sensor, Thermocouple Sensor and Frequency Sensor, please Connect the red lead
(Test leads) to Terminal Input-HI and black lead to Terminal Input-LO as shown in
Figure 2-36.
Figure 2-36 Sketch map for connecting
As the Current Sensor, please connect the red lead (Test leads) to Terminal
Input-HI (the jack marked “I”) and black lead to Terminal Input-LO as shown in
Figure2-37.
Figure 2-37 Current Sensor Connecting
To Next Page
Loading...
