Rigol DM3058 User Manual

RIGOL
User’s Guide for DM3058
VI
Safety Terms and Symbols
Terms in this Guide. These terms may appear in this manual:
WARNING: Warning statements indicate the conditions or practices that
could result in injury or loss of life.
CAUTION: Caution statements indicate the conditions or practices that
could result in damage to this product or other property.
CAT I (1000V) IEC Measurement Category II. The maximum voltage can
be measured by HI-LO terminal is 1000Vpk.
CAT II (600V): IEC Measurement Category II. Inputs may be connected
to mains (up to 600 VAC) under Category II over voltage
conditions.
Terms on the Product. These terms may appear in this manual:
DANGER indicates an injury or hazard that may immediately happen.
DANGER indicates an injury or hazard that may immediately happen.
CAUTION indicates that a potential damage to the instrument or other property
might occur.
Terms on the Product. These terms may appear in this manual:
!
!
!
!
Protective
Earth
Terminal
Hazardous
Voltage
Refer to
Instructions
Test
Ground
Chassis
Ground
!

Rigol DM3058 Specifications

General

Diode test	Yes
Product type	Digital multimeter
Frequency range	0.02 - 1000 kHz
AC current range	0.02 - 10 A
AC voltage range	0.2 - 750 V
DC current range	0.0002 - 10 A
DC voltage range	0.2 - 1000 V
Resistance range	200 - 100000000 Ω
Capacitance range	2 - 10000000 nF
Measuring category	CAT III 300V
Basic accuracy (frequency)	0.01 + 0.003
Basic accuracy (DC current)	0.055 + 0.005
Basic accuracy (DC voltage)	0.015 + 0.003
Basic accuracy (resistance)	0.020 + 0.003
Basic accuracy (capacitance)	1 + 0.5
Display digits	5.5 digits
Display size (HxV)	256 x 64 mm
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C

Weight and Dimensions

Depth	107 mm
Width	231.6 mm
Height	290.5 mm
Weight	2500 g