Rigol DM3058 - Page 87

RIGOL
User’s Guide for DM3058
2-67
5. Restore to factory defaults
Press  System  Cfg  Default Done, and then restart the system to
factory default state. The Parameter shown below:
Table 2-35 Parameter Lists of Factory Defaults:
Math Function
Factory Defaults Setting
Math Stats
Close
Math
Statistic
Math Register
All registers cleared
* dBm Resistance
*600Ω
Trigger Parameter
Factory Defaults Setting
Interval
400ms
Samples
1
Hold
0.1％
Trigger Sources
Auto Trigger
System Operations
Factor Defaults Setting
* Sound
* Open
* Separate
* Open
Measurement Parameter
Factory Defaults Setting
* Continue Resistance
10Ω
Filter
S
DC Resistance
10MΩ
Digit Resolution
5 ½
Measurement Function
DCV
range
Auto