Rigol DS1054Z Programming Guide

Chapter 1 Programming Overview RIGOL
MSO1000Z/DS1000Z Programming Guide 1-1
Chapter 1 Programming Overview
This chapter introduces how to build the remote communication between MSO1000Z/DS1000Z series
digital oscilloscope and the PC. It also introduces the remote control methods as well as the syntax,
symbols, parameters and abbreviation rules of the SCPI commands.
Main topics of this chapter:
 To Build Remote Communication
 Remote Control Methods
 SCPI Command Overview

Rigol DS1054Z Specifications

General

Channels	4
Bandwidth	50 MHz
Sample Rate	1 GSa/s
Memory Depth	24 Mpts
Display	7 inch TFT LCD (800x480)
Vertical Sensitivity	1 mV/div to 10 V/div
Time Base Range	5 ns/div to 50 s/div
Vertical Resolution	8 bits
Trigger Types	Edge, Pulse, Video, Slope
Connectivity	USB Host, USB Device, LAN
Input Impedance	1 MΩ
Power Supply	100-240 VAC, 45-440 Hz