Rigol DS1054Z Programming Guide

RIGOL Chapter 2 Command System
2-70 MSO1000Z/DS1000Z Programming Guide
:ETABle<n>:DATA?
Syntax
:ETABle<n>:DATA?
Description
Read the current event table data.
Parameter
Name
Type
Range
Default
<n>
Discrete
{1|2}
--
Return
Format
The query returns the event table data in the format as shown in the figure below.
Wherein, #9000000098 is the TMC data description header followed by the even table
data and its format is #900000dddd. dddd denotes the number of bytes of the valid
waveform data following the description header. For example, as shown in the figure
below, #9000000098 is the TMC data description header, wherein, 98 denotes that there
are 98 bytes of valid data. The content following 98 is the event table data.
Example
:ETABle1:DATA? /*The query returns the data as shown in the figure above*/
TMC Data
Description Header
Event Table
Data

Rigol DS1054Z Specifications

General

Channels	4
Bandwidth	50 MHz
Sample Rate	1 GSa/s
Memory Depth	24 Mpts
Display	7 inch TFT LCD (800x480)
Vertical Sensitivity	1 mV/div to 10 V/div
Time Base Range	5 ns/div to 50 s/div
Vertical Resolution	8 bits
Trigger Types	Edge, Pulse, Video, Slope
Connectivity	USB Host, USB Device, LAN
Input Impedance	1 MΩ
Power Supply	100-240 VAC, 45-440 Hz