Rigol DS1104Z Plus

Chapter 2 Command System RIGOL
MSO1000Z/DS1000Z Programming Guide 2-153
:TIMebase Commands
The :TIMebase commands are used to set the horizontal parameters, such as enabling the delayed sweep
and setting the horizontal timebase mode.
Command List:
 :TIMebase:DELay:ENABle
 :TIMebase:DELay:OFFSet
 :TIMebase:DELay:SCALe
 :TIMebase[:MAIN]:OFFSet
 :TIMebase[:MAIN]:SCALe
 :TIMebase:MODE
:TIMebase:DELay:ENABle
Syntax
:TIMebase:DELay:ENABle <bool>
:TIMebase:DELay:ENABle?
Description
Enable or disable the delayed sweep, or query the status of the delayed sweep.
Parameter
Name
Type
Range
Default
<bool>
Bool
{{1|ON}|{0|OFF}}
0|OFF
Explanation
Delayed sweep can be used to enlarge a length of waveform horizontally to view
waveform details.
Return Format
The query returns 1 or 0.
Example
:TIMebase:DELay:ENABle ON /*Enable the delayed sweep*/
:TIMebase:DELay:ENABle? /*The query returns 1*/