Rigol DS1104Z Plus Programming Guide

RIGOL Chapter 2 Command System
2-42 MSO1000Z/DS1000Z Programming Guide
:DECoder<n>:CONFig:LINE
Syntax
:DECoder<n>:CONFig:LINE <bool>
:DECoder<n>:CONFig:LINE?
Description
Turn on or off the bus display function, or query the status of the bus display function.
Parameter
Name
Type
Range
Default
<n>
Discrete
{1|2}
--
<bool>
Bool
{{1|ON}|{0|OFF}}
1|ON
Explanation
When this function is enabled, the bus will be displayed on the screen. You can send
the :DECoder<n>:POSition command to adjust the vertical display position of the bus.
Return
Format
The query returns 1 or 0.
Example
:DECoder1:CONFig:LINE OFF /*Turn off the bus display function*/
:DECoder1:CONFig:LINE? /*The query returns 0*/
:DECoder<n>:CONFig:FORMat
Syntax
:DECoder<n>:CONFig:FORMat <bool>
:DECoder<n>:CONFig:FORMat?
Description
Turn on or off the format display function, or query the status of the format display
function.
Parameter
Name
Type
Range
Default
<n>
Discrete
{1|2}
--
<bool>
Bool
{{1|ON}|{0|OFF}}
1|ON
Explanation
When this function is turned on, the current bus display format will be displayed at the
right of the label display (when the bus display is turned on). You can send
the :DECoder<n>:FORMat command to set the bus display format.
Return
Format
The query returns 1 or 0.
Example
:DECoder1:CONFig:FORMat OFF /*Turn off the format display function*/
:DECoder1:CONFig:FORMat? /*The query returns 0*/

Rigol DS1104Z Plus Specifications

General

Bandwidth	100 MHz
Channels	4
Sample Rate	1 GSa/s
Memory Depth	24 Mpts
Waveform Capture Rate	30, 000 wfms/s
Vertical Sensitivity	1 mV/div to 10 V/div
Timebase Range	5 ns/div to 50 s/div
Connectivity	USB Host, USB Device, LAN, AUX
Vertical Resolution	8 bits
Power Supply	100-240 V AC, 45-440 Hz
Display	7 inch TFT LCD
Trigger Types	Edge, Pulse, Video, Slope
Input Impedance	1 MΩ ± 2%