Rigol DS1104Z Plus Programming Guide

Chapter 3 Programming Demos RIGOL
MSO1000Z/DS1000Z Programming Guide 3-1
Chapter 3 Programming Demos
This chapter lists some programming demos to illustrate how to use commands to realize the common
functions of the oscilloscope in the development environments of Excel, Matlab, LabVIEW, Visual Basic 6.0
and Visual C++ 6.0. All the demos are based on VISA (Virtual Instrument Software Architecture).
The main topics of this chapter:
 Programming Preparations
 Excel Programming Demo
 Matlab Programming Demo
 LabVIEW Programming Demo
 Visual Basic Programming Demo
 Visual C++ Programming Demo

Rigol DS1104Z Plus Specifications

General

Bandwidth	100 MHz
Channels	4
Sample Rate	1 GSa/s
Memory Depth	24 Mpts
Waveform Capture Rate	30, 000 wfms/s
Vertical Sensitivity	1 mV/div to 10 V/div
Timebase Range	5 ns/div to 50 s/div
Connectivity	USB Host, USB Device, LAN, AUX
Vertical Resolution	8 bits
Power Supply	100-240 V AC, 45-440 Hz
Display	7 inch TFT LCD
Trigger Types	Edge, Pulse, Video, Slope
Input Impedance	1 MΩ ± 2%