Chapter 7 Protocol Decoding RIGOL
DS2000E User’s Guide 7-11
ASCII.
Press Offset and use to adjust the vertical display position of the bus.
Press BusStatus to turn the bus display on or off.
4. Event Table
The event table displays the decoded data, the corresponding line number, time,
data direction, ID and ACK information in table or details format. Press Event
Table Event Table to select "ON" (This operation is only available when
BusStatus is set to "ON") to enter the event table interface.
At this point, you can press View to display the event table in "Table" form (as
shown in
Figure 7-6) or "Details" form (as shown in Figure 7-7). If a USB storage
device is currently connected to the instrument, you can press Export to export
the data table to the external USB storage device in CSV format.
Figure 7-6 I2C Event Table (Table)
To Next Page
Loading...
