Rigol DS2000E Series User Manual

RIGOL Chapter 12 Store and Recall
12-6 DS2000E User’s Guide
2. Load the specified type of file in internal memory.
1) Press Storage  Storage to select "Setups" and then press Load to turn
on the disk management interface. Use to select "Local Disk" and then
press down
to open the local disk, as shown in Figure 12-3.
2) Use to select the desired file to load and press Load to load the file
selected.
Figure 12-3 Local Disk (Load)

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English