Rigol DS2000E Series - Page 274

RIGOL Chapter 16 Specifications
DS2000E User’s Guide
16-4
range)
Time Setting 10 ns to 1 s
Video Trigger
Polarity Positive, Negative
Synchrony All Lines, Line Num, Odd Field, Even Field
Standard Standard: NTSC, PAL/SECAM, 480P, 576P
Optional: 720P, 1080P, 1080I
Pattern Trigger
Pattern Setting H, L, X, Rising Edge, Falling Edge
Delay Trigger (Optional)
Edge Type Rising, Falling
Delay Type >, <, <>, ><
Delay Time 2 ns to 4 s
TimeOut Trigger (Optional)
Edge Type Rising, Falling, Rising/Falling
Timeout time 16 ns to 4 s
Duration Trigger (Optional)
Pattern Setting H, L, X
Trigger Criteria >, <, <>
Duration Time 2 ns to 4 s
Setup/Hold Trigger
Edge Type Rising, Falling
Data Type H, L
Setup Time 2 ns to 1 s
Hold Time 2 ns to 1 s
RS232/UART Trigger
Polarity Normal, Invert
Trigger Condition Start, Error, Check Error, Data
Baud Rate 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600
bps, 115200 bps, 230400 bps, 460800 bps, 921600 bps, 1
Mbps, and User
Data Bits 5 bits, 6 bits, 7 bits, 8 bits
I2C Trigger
Trigger Condition Start, Restart, Stop, Missing ACK, Address, Data, A&D
Address Bits 7 bits, 8 bits, 10 bits
Address Range 0 to 127, 0 to 255, 0 to 1,023