Rigol DSA1030A series User Manual

RIGOL Front Panel Key Reference
2-90 User’s Guide for DSA1000 Series
3. Peak Search
Sets the peak search condition. The available options are Maximum and Para.
 If Max is selected, the system searches for the maximum on the trace.
 If Para is selected, the system searches for the peak that meets the
parameter condition on the trace.
 This setting has meaning only for the peak search which will be executed
when pressing the Peak key on the front panel, while other searches such
as Next Peak, Peak Right, Peak Left and Min Search are all based on the
Para you specified.
2.5.4.8 Peak Table
Open the Peak Table, you will see a peak list that meets the parameter condition (with
Frequency and Amplitude shown). The table allows up to 10 such peaks.
Figure 2-28 Peak Table
1. State
Turn on or off the Peak Table, the default is Off.
2. Peak Sort
Chooses a rule for peak sorting, the default is frequency ascending.

Rigol DSA1030A series Specifications

General

Brand	Rigol
Model	DSA1030A series
Category	Measuring Instruments
Language	English