RIGOL  Appendix 
  User’s Guide for DSA1000 Series 
Appendix C: General Care and Cleaning 
General Care 
Do not store or leave the instrument in where the instrument will be exposed to direct 
sunlight for long periods of time. 
 
Cleaning 
Clean the instrument regularly according to its operating conditions. To clean the 
exterior surface, perform the following steps: 
1.  Disconnect the instrument from all power sources. 
2.  Clean the loose dust on the outside of the instrument with a lint- free cloth (with 
a mild detergent or water). When cleaning the LCD, take care to avoid scarifying 
it. 
 
 
 
To avoid damages to the instrument, do not expose them to liquids which 
have causticity. 
 
 
 
WARNING  
To avoid injury resulting from short circuit, make sure the instrument is 
completely dry before reconnecting to a power source.