Rigol DSA1030A series - Amplitude

Specification RIGOL
User’s Guide for DSA1000 Series
6-3
Frequency Span
Range DSA1030, DSA1030-TG 0 Hz, 100 Hz to 3 GHz
Uncertainty ±span / (sweep points-1)
SSB Phase Noise
Carrier Offset 10 kHz <-80 dBc/Hz
Bandwidths
Resolution Bandwidth
(-3 dB)
100 Hz to 1 MHz, in 1-3-10
sequence
Resolution Bandwidth
(-6dB)
200 Hz, 9 kHz, 120 kHz,
1 MHz
RBW Uncertainty < 5%, nominal
Resolution Filter Shape
Factor (60 dB: 3 dB)
<5, nominal
Video Bandwidth (-3 dB) 1 Hz to 3 MHz, in 1-3-10
sequence
6.1.2 Amplitude
Measurement Range (DSA1030)
Range 10 MHz to 3 GHz DANL to +30 dBm
1 MHz to 10 MHz DANL to +21 dBm
9 kHz to 1 MHz DANL to +17 dBm
Maximum rated input level
DC Voltage 50 V
CW RF Power RF attenuation ≥ 20dB 30 dBm (1 W)
Max. Damage Level 40 dBm (10 W)
Note: When input level >33 dBm, the protection switch will be on.
1dB Gain Compression
Total Power at Input Mixer
fc ≥ 50 MHz,
preamplifier off
>0 dBm
Note: Mixer power level (dBm) = input power (dBm) – input attenuation (dB).