RIGOL Troubleshooting
5-12 User’s Guide for DSA1000 Series
This particular error should be used when file or block data formats are
recognized by the instrument but cannot be executed for reasons of
version incompatibility. For example, an unsupported file version, an
unsupported instrument version.
Indicates that a legal program command or query could not be
executed because of a hardware problem in the device. This error
message should be used when the device cannot detect the more
specific errors described for errors -241.
Indicates that a legal program command or query could not be
executed because the option was not installed.
-250 Mass storage error.
Indicates that a mass storage error occurred. This error message
should be used when the device cannot detect the more specific errors
described for errors –251 through -258.
-251 Missing mass storage.
Indicates that a legal program command or query could not be
executed because an option mass storage with enough density was not
installed.
-252 Missing media.
Indicates that a legal program command or query could not be
executed because of no disk.
-253 Corrupt media.
Indicates that a legal program command or query could not be
executed because of a bad disk or wrong disk formatting.
-254 Media full.
Indicates that a legal program command or query could not be
executed because there is no room on the disk.
Indicates that a legal program command or query could not be
executed because an attempt was made to read or copy a nonexistent
file.
-257 File name error.
Indicates that a legal program command or query could not be
executed because an attempt was made to copy to a duplicate file
name.
-258 Media protected.
To Next Page
Need help?
General
