RIGOL Troubleshooting
5-16 User’s Guide for DSA1000 Series
324 File name existed.
The file name received already exists, please re-input.
325 Input empty.
The input is empty, please input a legal string before saving.
Other language except English not supported.
Any other languages are disabled except for English.
328 File operation failed.
329 No space to save file.
The document or file can not be created or saved owing to no space
available.
The length of license key must be less than 4 characters.
331 Invalid license key.
The length of option serial number must be less than 20 characters.
333 Invalid installation, please insert USB disk again.
340 DHCP renew failed.
Failed to configure IP address with DHCP server. Please try manual IP.
341 IP conflict.
The IP address received is in conflict with another computer on the
network. Please try another IP address.
342 Invalid IP.
The IP address received is invalid.
350 Can’t auto-couple sweep time in zero span.
Sweep time can not be coupled automatically in zero span except for
manually.
351 Zero span unavailable at power measurement mode.
354 Pre-amplifier disable.
Please adjust the settings of reference level and attenuator as well as
maximum mixing level.
Scale/div invalid in linear scale mode.
Invalid function in zero span.
In zero span, the following operations cannot be executed: Signal Track
On, Channel Forward, Channel Reverse, Span Zoom In, Span Zoom
Out, Peak->CF, Mkr->CF, Mkr->Step, Mkr->Start, Mkr->Stop, Mkr
Delta->CF, Mkr Delta->Span, setting the Mark readout as FREQ or
PERIOD.
357 Invalid function in non-zero span.
To Next Page
Loading...
