Troubleshooting RIGOL
User’s Guide for DSA1000 Series
5.2.2.4 Query Error
Number Error Description
-400 Query error.
This is the generic query error for devices that cannot detect more
specific errors. This code indicates only that a Query Error as defined in
IEEE 488.2, 11.5.1.1.7 and 6.3 has occurred.
-410 Query INTERRUPTED.
Indicates that a condition causing an INTERRUPTED Query error
occurred (see IEEE 488.2, 6.3.2.3); for example, a query followed by
DAB or GET before a response was completely sent.
-420 Query UNTERMINATED.
Indicates that a condition causing an UNTERMINATED Query error
occurred (see IEEE 488.2, 6.3.2.2); for example, the device was
addressed to talk and an incomplete program message was received.
Indicates that a condition causing a DEADLOCKED Query error occurred
(see IEEE 488.2, 6.3.1.7); for example, both input buffer and output
buffer are full and the device cannot continue.
-440 Query UNTERMINATED after indefinite response.
Indicates that a query was received in the same program message after
a query requesting an indefinite response was executed (see IEEE
488.2, 6.5.7.5).
To Next Page
Loading...
