Rigol DSA1030A series User Manual

RIGOL Front Panel Key Reference
2-20 User’s Guide for DSA1000 Series
2.1.3.12 Input
Sets the input impedance for voltage-to-power conversions (see Equation 2-4). The
default is 50Ω. To measure a 75Ω device, you should use a 75Ω to 50Ω adapter
supplied by RIGOL to connect the analyzer with the system under test and then set
this menu to 75 Ω.
Note: A “75 Ω” sign will be shown in the status bar of the screen in this situation.

Rigol DSA1030A series Specifications

General

Brand	Rigol
Model	DSA1030A series
Category	Measuring Instruments
Language	English