09/2016 Page 18 5IN2371 C
Describing Installer-Set ID Numbers for Bus Devices
For each bus device category (see table below), each of its respective bus devices
gets a sequentially-assigned, installer-set “physical” ID number that the installer
physically sets with the device’s DIP switches before powering up the device.
NOTE: To be unique, bus devices in the same category that are on the same bus
line must have sequentially different physical ID numbers, whereas different
devices (or the same bus device types on different bus lines) can have the same
physical ID number.
Categories Respective bus devices
ZONES
Bus Zone Expanders
Bus zones (bus detectors)
Zone expansion modules: Single-Zone Expander, 8-Zone
Expander, 16-Zone Expander
Wireless Expander
OUTPUTS Output expansion modules: (4 outputs/3A, 8 outputs/100 mA)
POWER SUPPLY
UNITS
Power supply expansion modules: 1.5A, 3A
WIRED KEYPADS Elegant, PS LCD, LS LCD
BUS SOUNDERS ProSound, Lumin8
KEY READERS Proximity Key Reader
To Next Page
Loading...
