09/2016 Page 6 5IN2371 C
Getting Started
This guide covers the main tasks required to install and set up the ProSYS Plus
system. Installation and setup should be performed by a professional alarm system
installer. For additional comprehensive details, refer to the ProSYS Plus Installation
and Programming Manual.
Main Steps for Initial System Setup
INSTALLATION
Step 1: Creating a Plan for Mounting the System
Step 2: Wiring, Settings, and Module Installations at the Main Panel
Step 3: Bus Line Installations
Step 4: Connecting Relay Detectors
Step 5: Connecting the Backup Battery and Mounting the Main Panel
SYSTEM INITIALIZATION, DEVICE ALLOCATIONS & GENERAL SYSTEM
CONFIGURATION
Step 1: Working with the Keypad and Installer Menus
Step 2: Powering-Up and Initializing the System
Step 3: Allocating and Configuring Installed Components
Step 4: Allocating Wireless Zones
Step 5: Basic Zone Configuration for All Zone Types
Step 6: Advanced Zone Configuration for Bus Zones and Wireless Zones
Step 7: Configuring System Communication
Step 8: Configuring Cloud Connectivity
Step 9: Configuring Common System Parameters
INSTALLER PROGRAMMING
Step 1: Defining Additional Parameters in the Installer Programming Menu
Step 2: Exiting Installer Programming Menu after Initial System Configuration
Step 3: Defining Parameters in other Installer Menus
TESTING THE SYSTEM
INSTALLER RESPONSIBILITIES FOR ASSISTING THE CLIENT
To Next Page
Loading...
