Riverstone Networks RS 3000 User Manual

2-2 Riverstone Networks RS 3000/3100/3200 Switch Router Getting Started Guide
Specifications Introduction
2.2 SPECIFICATIONS
The RS 3000/RS 3100/RS 3200 hardware provides the wire-speed switching. The software provides the performance
monitoring, filtering, and Quality of Service (QoS). The router’s performance is not compromised through the
implementation of these software features.
Basic hardware and software specifications for the router are listed in Table 2-2.
Table 2-2 Technical specifications
Feature Specification
Throughput
• 8 Gbps non-blocking switching fabric
• Up to 8 million packets-per-second routing throughput
Capacity
• Up to 250,000 routes
• Up to 512,000 Layer-4 application flows
• 256,000 Layer-2 MAC addresses
• 4,096 Virtual LANs (VLANs)
• 20,000 Layer-2 security and access-control filters
• 3 MB input/output buffering per Gigabit port
• 1 MB input/output buffering per 10/100 port
• 16 MB shared input/output buffering across WAN ports
on a WAN module
Routing protocols
• IP: RIP v1/v2, OSPF, BGP v2/v3/v4, IS-IS
• IPX: RIP, SAP
• Multicast: IGMP, DVMRP, GARP/GVRP
Bridging and VLAN
protocols
• 802.1d Spanning Tree
• 802.1Q (VLAN trunking)
• Rapid Spanning Tree Protocol (RSTP)
• Per-VLAN Spanning Tree (PVST)
MPLS
• LER and LSR complete functionality
• RSVP-TE and LDP for label distribution and dynamic
LSP creation
• OSPF-TE and ISIS-TE traffic engineering extensions
with support for online CSPF

Riverstone Networks RS 3000 Specifications

General

Brand	Riverstone Networks
Model	RS 3000
Category	Network Router
Language	English