Riverstone Networks RS 3000 User Manual

Riverstone Networks RS 3000/3100/3200 Switch Router Getting Started Guide 2-9
Introduction Hardware Features
2.4 HARDWARE FEATURES
This section describes the RS 3000/RS 3100/RS 3200’s hardware specifications. For information about installing the
chassis and line cards, see Chapter 3, "Hardware Installation." This section describes the following hardware:
• Chassis and external controls
• Motherboard features
• Power supplies
• Line Cards
2.4.1 Chassis
Figure 2-1 shows the front view of an RS 3000. The RS 3000 chassis contains 32 independent, RJ-45-based, Ethernet
connectors and two expansion slots for line cards. It also contains external controls and connectors as described in
Section 2.4.2, "External Controls and Connections".
Figure 2-1 Front view of a RS 3000 chassis
Figure 2-2 shows the front view of an RS 3100. The RS 3100 chassis contains 32 independent, RJ-45-based, Ethernet
connectors and two expansion slots for line cards.It also contains external controls and connectors as described in
Section 2.4.2, "External Controls and Connections".
Figure 2-2 Front view of a RS 3100 chassis
Figure 2-3 shows the front view of an RS 3200. The RS 3200 chassis contains 32 independent Ethernet ports that can
be individually configured with SFP transceivers (as specified in Table 2-3) and two expansion slots for line cards. It
also contains external controls and connectors as described in Section 2.4.2, "External Controls and Connections".
3
4
CONSOLE
10/100 MGMT
OK
ERR
DIAG
HBT
1
2
RST
RS 3000
3
4
CONSOLE
10/100 MGMT
OK
ERR
DIAG
HBT
1
2
RST
RS 3100
DIAG
NMI

Riverstone Networks RS 3000 Specifications

General

Brand	Riverstone Networks
Model	RS 3000
Category	Network Router
Language	English