Rlide R2 Series - Page 91

89
c.
Input new data and press [ENT].
Input new data
[ENT]
Edit VT AL
03/05
CH:
50.500
ELEV:
30.000m
Len:
60.000m
Strt
End
Prev
Next
d.
Screen displays the modified new data.
Press [Prev] or [Next] to view and modify
other data.
Edit VT AL
03/05
CH:
50.500
ELEV:
10.000m
Len:
20.000m
End
Next
The method of Receiving VT AL data is same as Receiving HZ AL data. Please refer to “7.7.3 Receive HZ
AL data”.
7.7.7 Delete Vertical Alignment Data
The vertical alignment data in internal memory can be deleted. Operation is shown below.
STEP
OPERATION
DISPLAY
a.
In VT Alignment select “Delete VT AL”.
[4]
VT Alignment
1.
Define VT AL
2.
Edit VT AL
3.
Receive VT AL
4.
Delete VT AL
b.
The program displays as the graph.
Delete VT AL
* Sure?
Abrt
OK
c.
Press [OK] to delete VT AL, all the
vertical alignment data in internal
memory will be deleted.
The system returns to VT Alignment
screen. User may re-define vertical
alignment data. (Here take deleting
vertical alignment data for example)
Press [Abrt] if it is not to be deleted.
[OK]
VT Alignment
1.
Define VT AL
2.
Edit VT AL
3.
Receive VT AL
4.
Delete VT AL