Robustel R5020 - Page 13

Robustel R5020 User Guide
RT_UG_R5020_v.1.0.2 Mar. 17, 2023 13/167
 Magnet isolation protection: 1 KV
WiFi Interface
 Number of antennas: 2 (WiFi1 + WiFi2)
 Connector: RP-SMA-K
 Standards: 802.11a/b/g/n/ac, 2*2 MIMO, supports AP and Client modes
 Frequency bands: 2.412 - 2.472 GHz (2.4 GHz ISM band)
5.15 - 5.825 GHz (5 GHz ISM band)
 Security: Open, WPA, WPA2, WEP
 Encryption: AES, TKIP, WEP64
 Data speed: 5G: Up to 867Mbps
2.4G: Up to 300Mbps
GPS (Optional)
 Number of antennas: 2 (ANT1/GNSS: L5, ANT2/GNSS: L1)
 Connector: SMA-K with 50 ohms impedance
 GNSS Technology: GPS, QZSS, GLONASS, Galileo, BeiDou
 Tracking sensitivity: -160 dBm
 Horizontal position accuracy: 2.5 m
Serial Interface
 Number of ports: 1 x RS232 + 1 x RS485
 Connector: 2 x 5-pin 3.5 mm female socket
 ESD protection: ±15 KV
 Baud rate: 300 bps to 115200 bps
 Parameters: 8E1, 8O1, 8N1, 8N2, 8E2, 8O2, 7E2, 7O2, 7N2, 7E1, 7O1, 7N1
 RS232: TxD, RxD, GND
 RS485: Data+ (A), Data- (B)
DI/DO
 Type: 1 x DI + 1 x DO, wet contact
 Connector: 2 x 5-pin 3.5 mm female socket
 Isolation: 3.75KVDC
 Absolute maximum VDC: “V+” + 30VDC (DI), 30VDC (DO)
 Absolute maximum ADC: 100mA
Others
 1 x RST button (Tact Switch)
 1 x Micro SD interface
 1 x USB 2.0 host, Type A, 5 V/500 mA
 LED indicators - 1 x RUN, 1 x Modem, 1 x USR, 1 x RSSI, 1 x NET, 1 x WiFi
Network port indicator (link indicator)
 Built-in: Watchdog, Timer
Power Supply and Consumption
 Connector: 3-pin 3.5 mm female socket with lock