Robustel R5020 - Commands Reference; Quick Start with Configuration Examples

Robustel R5020 User Guide
RT_UG_R5020_v.1.0.2 Mar. 17, 2023 155/167
# config save_and_apply
your setting take effect on the device.
Note: Commit and save_and_apply plays the same role.
6.3 Commands Reference
Commands
Syntax
Description
Debug
Debug parameters
Turn on or turn off debug function
Show
Show parameters
Show current configuration of each function
Set
Set parameters
All the function parameters are set by commands set and add, the
difference is that set is for the single parameter and add is for the list
parameter
Add
Add parameters
Note: More detail about CLI command, please refer to “Command Line Interface Guide”.
6.4 Quick Start with Configuration Examples
The best and quickest way to master CLI is firstly to view all features from the webpage and then read all CLI
commands at a time, finally learn to configure it with some reference examples.
Example 1: Show current version
# status system
firmware_version = 3.1.0
firmware_version_full = "3.1.0 (Rev 3527)"
kernel_version = 3.18.92
device_model = R5020-5G
serial_number = 20113056894526
uptime = "0 days, 00:37:26"
system_time = "Sun Jan 1 00:37:09 2017 (NTP not updated)"
ram_usage = "386M Free/448M Total"
#
Example 2: Update firmware via tftp
# tftpupdate （space+?）
firmware New firmware
# tftpupdate firmware （space+?）
String Firmware name
# tftpupdate firmware R5020-firmware-sysupgrade-unknown.ruf host 192.168.100.99 //enter a new firmware name
Downloading
R5020-firmware-s 100% |*******************************| 5018k 0：00：00 ETA
Flashing