Robustel R5020 - Wifi

Robustel R5020 User Guide
RT_UG_R5020_v.1.0.2 Mar. 17, 2023 60/167
4.2.5 WiFi
This section allows you to configure the parameters of two WiFi modes. Router supports either WiFi AP mode or
Client mode, and defaults as AP.
WiFi AP
Configure Router as WiFi AP
Click Interface > WiFi > WiFi, select “AP” as the mode and click “Submit”.
Note: Please remember to click Save & Apply after finish the configuration, so that the configuration can be took
effect.
Click the Access Point 2G column to configure the parameters of WiFi AP. By default, the security mode is set as
“Disabled”.