Robustel R5020 - How to Configure the CLI

Robustel R5020 User Guide
RT_UG_R5020_v.1.0.2 Mar. 17, 2023 154/167
help Display an overview of the CLI syntax
ovpn_cert_get Download OpenVPN certificate file via http or ftp
ping Send messages to network hosts
reboot Halt and perform a cold restart
set Set system configuration
show Show system configuration
status Show running system information
tftpupdate Update firmware or configuration file using tftp
traceroute Print the route packets trace to network host
trigger Trigger action
urlupdate Update firmware via http or ftp
ver Show version of firmware
6.2 How to Configure the CLI
The following list is a description of the help information commands and the error commands encountered during
configuration.
Commands /tips
Description
?
Typing a question mark “?” will show you the help information.
Example:
# config（tick ‘?’）
config Configuration operation
# config（tick space key+ +’?’）
commit Save the configuration changes and take effect changed
configuration
save_and_apply Save the configuration changes and take effect changed
configuration
loaddefault Restore Factory Configuration
Ctrl+c
Press these two keys at the same time, except its “copy” function but also
can be used for “break” out of the setting program.
Syntax error: The command is not
completed
Command is not completed.
Tick space key+ Tab key
It can help you finish you command.
Example:
# config (tick Enter key)
Syntax error: The command is not completed
# config (tick space key+ Tab key)
commit save_and_apply loaddefault
#config commit
When your setting finished, you should enter those commands to make