Robustel R5020 User Guide
RT_UG_R5020_v.1.0.2 Mar. 17, 2023 143/167
Click the edit button of SIM1 to set its parameters according to your application request.
When finished, click Submit > Save & Apply for the configuration to take effect.
4.7.2 SMS Remote Control
The router supports remote control via SMS. You can use following commands to get the status of the router, and set
all the parameters. There are three authentication types for SMS control. You can select from “Password”,
“Phonenum” or “Both”.
An SMS command has the following structure:
1. Password mode—Username: Password; cmd1; cmd2; cmd3; …cmdn (available for every phone number).
2. Phonenum mode-- Password; cmd1; cmd2; cmd3; … cmdn (available when the SMS was sent from the phone
number which had been added in R5020’s phone group).
3. Both mode-- Username: Password; cmd1; cmd2; cmd3; …cmdn (available when the SMS was sent from the
phone number which had been added in R5020’s phone group).
Note: All command symbols must be entered in the half-angle mode of the English input method.
SMS command Explanation:
1. User name and Password: use the same username and password as WEB manager for authentication.
2. cmd1, cmd2, cmd3 to Cmdn, the command format is the same as the CLI command, more details about CLI cmd
please refer to Chapter 6 Introductions for CLI.
Note: Download the configure XML file from the configured web browser. The format of SMS control command
can refer to the data of the XML file.
Go to System > Profile > Export Configuration File, click
to generate the XML file and click
to export the XML file.
To Next Page
Loading...
