Robustel R5020 - Page 144

Robustel R5020 User Guide
RT_UG_R5020_v.1.0.2 Mar. 17, 2023 144/167
XML command:
<lan>
<network max_entry_num="2">
<id>1</id>
<interface>lan0</interface>
<ip>172.16.24.24</ip>
<netmask>255.255.0.0</netmask>
<mtu>1500</mtu>
SMS cmd:
set lan network 1 interface lan0
set lan network 1 ip 172.16.24.24
set lan network 1 netmask 255.255.0.0
set lan network 1 mtu 1500
3. The semicolon character (‘;’) is used to separate more than one command packed in a single SMS.
4. E.g.
admin:admin;status system
In this command, username is “admin”, password is “admin”, and the function of the command is to get the
system status.
SMS received:
hardware_version = 1.1
firmware_version = 3.1.0
firmware_version_full = "3.1.0 (Rev 3527)"
kernel_version = 4.9.152
device_model = R5020
serial_number = ""
uptime = "0 days, 00:02:55"