Robustel R5020 - Factory Default Settings; Log in the Router

Robustel R5020 User Guide
RT_UG_R5020_v.1.0.2 Mar. 17, 2023 32/167
3.2 Factory Default Settings
Before configuring your router, you need to know the following default settings.
Item
Description
Username
admin
Password
admin
ETH0/POE
192.168.0.1/255.255.255.0, WAN mode
ETH1
192.168.0.1/255.255.255.0, LAN mode
ETH2
192.168.0.1/255.255.255.0, LAN mode
ETH3
192.168.0.1/255.255.255.0, LAN mode
DHCP Server
Enabled
3.3 Log in the Router
To log in to the management page and view the configuration status of your router, please follow the steps below.
1. On your PC, open a web browser such as Internet Explorer, Google and Firebox, etc.
2. From your web browser, type the IP address of the router into the address bar and press enter. The default IP
address of the router is 192.168.0.1, though the actual address may vary.
3. In the login page, enter the username and password, choose language and then click LOGIN. The default
username and password are “admin”.
Note: If enter the wrong username or password over six times, the login web will be locked for 5 minutes.