Robustel R5020 - Openvpn

Robustel R5020 User Guide
RT_UG_R5020_v.1.0.2 Mar. 17, 2023 149/167
4.8.2 OpenVPN
OpenVPN supports both client and P2P (peer-to-peer) modes. Here, the client is used as an example. The sample
topology is shown below:
OpenVPN_Server:
Generate relevant OpenVPN certificate on the server side firstly, and refer to the following commands to
configuration the Server:
local 202.96.1.100
mode server
port 1194
proto udp
dev tun
tun-mtu 1500
fragment 1500
ca ca.crt
cert Server01.crt
key Server01.key
dh dh1024.pem
server 10.8.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt
push "route 192.168.3.0 255.255.255.0"
client-config-dir ccd
route 192.168.1.0 255.255.255.0
keepalive 10 120
cipher BF-CBC
comp-lzo
max-clients 100
persist-key
persist-tun
status openvpn-status.log
verB 3