Robustel R5020 User Guide
RT_UG_R5020_v.1.0.2 Mar. 17, 2023 50/167
The window is displayed as below when choosing “Server” as the mode.
The window is displayed as below when choosing “Relay” as the mode.
Click the toggle button to enable/disable the DHCP function.
Select from “Server” or “Relay”.
Server: Lease IP address to DHCP clients which have been
connected to LAN port
Relay: Router can be DHCP Relay, which will provide a relay
tunnel to solve problem that DHCP Client and DHCP Server is not
in a same subnet
Define the beginning of the pool of IP addresses which will be leased
to DHCP clients.
To Next Page
Loading...
