ROCAMED MH01 - Laser and Electric System; Electrical Control

20
NOTE-MH01-EN rev05
3.2.4 Laser and electric system
The laser system consists of the source (2100nm 30W Ho:YAG laser ), the internal hydraulic
circuit, the optical fiber launch system and the power and control electronics. For all
technical information relating to the laser system and electrical system, contact the company
ROCAMED
3.2.5 Electrical control
The electrical controls include a main switch and the key switch, the emergency red push
button.
Main switch:
The main switch feeds the device. There are two positions on the switch: I and O.
To switch ON the device, make the switch to I position.
To switch OFF the device, make the switch to O position.
Key switch:
The key switch to turn on the device. There are two positions on the switch: and .
To switch ON the device, insert the key and turn to position.
To switch OFF, turn the key on the position and remove key.
Emergency red push button:
The emergency red push button is designed for emergencies or when the operator must
immediately turn off the device. To switch off immediately, press the button.
To reset the emergency red push button turn the knob clockwise.