ROCAMED MH01 - Rfid Fiber Connection

30
NOTE-MH01-EN rev05
5.1.1 RFID Fiber connection
Connect the fiber. The system recognizes automatically type and uses of the fiber
connected showing the information data on the display (in the example first use of a reusable
272 µm fiber):
WARNING:
The optical fiber size visualized on the display must be the same of the
used
optical fiber size
. Before starting the laser emission, please control that the
optical
fiber size coinciding with the indications impressed on the connector of the fiber.
After a few seconds, the main menu will be present the main screen.