ROCAMED MH01 - Transportation

23
NOTE-MH01-EN rev05
Warning:
Do not start using the laser device without reading this manual. The warranty does
not cover damage that occurred prior to installation.
4.2.1 Transportation
To transport the laser, disconnect fittings, fiber and power cord; unplug the pedal and
remote locking. Finally, the laser and the accessories should be stored in slots inside the
packaging.
Warning:
During device transportation from a room to another, the device shall be
pulled using the handle placed on the front side of the device as shown in
Figure A and B. Avoid pulling the device on sloping surfaces as shown in Figure
C and D, the device could tip over.
A
B
C
D