11 • Troubleshooting
152
■ The screens for entering the date and the time
appear.
4 Enter the date and time. After you have entered the
correct information, confirm each screen with .
■ Unless your QC configuration is Always OK (see
page 121), the meter will now be in QC Lockout due
to the manually entered date/time.
5 Synchronize the meter’s date/time with the date/
time of your facility via base unit or, if working wire-
lessly, wait at least ten minutes for the next WLAN
synchronization before performing any further
tests.
Even if your configuration does not require it, we
recommend always performing a QC test after a meter
reset.
123
456
789
0
Date
01/01/05
09/18/13
12:00 am
123
456
789
AM/PM0
Time
12:00 am
09/18/13
12:48 pm
To Next Page
Loading...
Need help?
General
