Powering Up and Entering an Operator ID • 2
39
Entering an operator ID with
barcode scanner
When the screen for entering the operator ID is
displayed:
1 Press and release . The button now appears
with a black background (during the scan).
2 Hold the meter so that the window of the barcode
scanner is approx. 10-20 cm (4-8 in) above the bar-
code you wish to read.
The meter beeps once the barcode has been read suc-
cessfully. The barcode information appears in the opera-
tor ID field. The barcode scanner turns off after 10
seconds, if a barcode is not scanned.
123
456
789
A-O0
Operator ID
12:48 pm
09/18/13
To Next Page
Loading...
