Roche ACCU-CHEK Inform II User Manual

3 • Patient Glucose Testing
48
Inserting test strips After confirming the test strip lot, a flashing green arrow
appears on screen and prompts you to insert the test
strip.
1 Remove the test strip from the test strip vial and
close the vial with the cap.
2 Hold the test strip so the lettering “ACCU-CHEK” is
facing upward.
3 Slide the test strip into the test strip port as far as it
goes in the direction indicated by the arrows on the
test strip.
The meter beeps. The hourglass icon appears and indi-
cates that the meter is checking the test strip. Do not
apply blood while it is displayed.
Patient Test
Patient 123456789
Strip L
ot 545794
12:48 pm
09/18/13
Patient Test
Patient 123456789
Strip L
ot 545794
12:48 pm
09/18/13

Roche ACCU-CHEK Inform II Specifications

General

Brand	Roche
Model	ACCU-CHEK Inform II
Category	Blood Glucose Meter
Language	English