Roche ACCU-CHEK Inform II - Entering or Selecting the Patient ID

Patient Glucose Testing • 3
43
As mentioned previously, the following steps must be
completed already:
1 The meter is switched on.
2 You have entered your operator ID.
3 You have completed login by selecting and
the Main Menu screen is displayed.
Entering or selecting the patient
ID
After preparing the meter as described, you can proceed
to the steps directly related to testing:
1 From the Main Menu screen touch Patient Test.
2 Enter or select the Patient ID as described on the
following pages.
3 If the function Patient Confirmation is enabled,
verify and confirm the displayed patient informa-
tion, after you entered or selected the ID.
ABCDE
F GHI J
KLMNO
P-Z 123
Patient ID
123456789
12:48 pm
09/18/13
D-503: Patient ID:
123456789
Name:
Mary-Jane Miller
DOB: 12/03/56
Is this correct?
Patient Confi rmation

Main Menu
Review Results
Control Test
Patient Test
12:48 pm
09/18/13
123
456
789
A-O0
Patient ID
12:48 pm
09/18/13