EasyManua.ls Logo

Roche ACCU-CHEK Inform II - Page 177

Roche ACCU-CHEK Inform II
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix • B
177
The current RF system consists of an antenna and a
WLAN system-on-chip (SoC) along with other compo-
nents. The WLAN system-on-chip is the core of the
WLAN system. The RF system used in the Accu-Chek
Inform II meter specifically adheres to the following
specifications:
Its WLAN system-on-chip supports IEEE 802.11b
and 802.11g. It works seamlessly together with other
Wi-Fi certified transceivers. It also implements the
Wi-Fi Protected Access (WPA™ - Enterprise and
WPA™ - Personal), Wi-Fi Protected Access 2
(WPA2™ - Enterprise and WPA2™ - Personal), and
Wired Equivalent Privacy (WEP) security mecha-
nisms with Temporal Key Integrity Protocol (TKIP)
and Advanced Encryption Standard (AES).
In addition, the system supports the extensible
authentication protocol (EAP) with EAP-TLS, EAP-
TTLS/MSCHAPv2 and PEAPv0/EAP-MSCHAPv2.
The Accu-Chek Inform II meter interoperability
Wi-Fi certificate can be accessed at
http://certifications.wi-fi.org/search_products.php.
Further information including a glossary of terms,
frequently asked questions, and other topics related
to Wi-Fi technology can be found on the Wi-Fi Alli-
ance site (http://www.wi-fi.org/).
The used channels in the 2.4 GHz-band are chan-
nels 1-11, which are the legally allowed channels in
the USA. (Channels 12-14 are not used by the
Accu-Chek Inform II meter.)
RF output power is approximately 15 dBm at a data
rate of 54 MBPS.

Table of Contents

Other manuals for Roche ACCU-CHEK Inform II

Related product manuals