Rockwell Automation Allen-Bradley Kinetix 5300 - Page 129

Rockwell Automation Publication KNX-SG001H-EN-P - December 2020 129
Kinetix 5300 Single-axis EtherNet/IP Servo Drives
Performance Specifications with Frame 70 Linear Thrusters
Performance specification data and curves reflect nominal system performance of a typical system with the motor at 40 °C (104 °F) and the drive at 50 °C (122 °F) ambient temperature, and
rated line voltage. For additional information on ambient temperature and line conditions, refer to Motion Analyzer.
Performance Specifications with Frame 100 Linear Thrusters
Performance specification data and curves reflect nominal system performance of a typical system with the motor at 40 °C (104 °F) and the drive at 50 °C (122 °F) ambient temperature, and
rated line voltage. For additional information on ambient temperature and line conditions, refer to Motion Analyzer.
Linear Thruster
Cat. No.
Velocity, max
230V AC
m/s
System Continuous
Stall Current
A 0-pk
System Continuous
Stall Force
N (lb)
System Peak
Stall Current
A 0-pk
System Peak
Stall Force
N (lb)
Rated Output
230V AC
kW
Kinetix 5300 Drives
(230V AC input)
LDAT-S072010-Dxx
…
LDAT-S072070-Dxx
3.5 6.0
364 (82)
22.0
1055 (237)
1.03 2198-C1015-ERS
LDAT-S072010-Exx
…
LDAT-S072070-Exx
1.7 3.0 11.0 0.47 2198-C1004-ERS
LDAT-S073010-Dxx
…
LDAT-S073070-Dxx
3.5 9.0
554 (125)
32.8
1576 (354)
1.57
2198-C1015-ERS
(1)
(1) Rated peak stall-torque is specified with three-phase operation. To achieve rated peak stall-torque performance with single-phase operation, use a catalog number 2198-C1020-ERS.
LDAT-S073010-Exx
…
LDAT-S073070-Exx
1.2 3.0 10.9 0.41 2198-C1004-ERS
LDAT-S074010-Dxx
…
LDAT-S074070-Dxx
3.5 11.9
730 (164)
43.5
2088 (469)
2.08 2198-C1020-ERS
LDAT-S074010-Exx
…
LDAT-S074070-Exx
1.8 6.0 21.7 0.95 2198-C1007-ERS
LDAT-S076010-Dxx
…
LDAT-S076070-Dxx
3.5 18.2
1122 (252)
66.4
3189 (717)
3.17 2198-C2030-ERS
LDAT-S076010-Exx
…
LDAT-S076070-Exx
1.8 9.1 33.2 1.45
2198-C1015-ERS
(1)
Linear Thruster
Cat. No.
Velocity, max
230V AC
m/s
System Continuous
Stall Current
A 0-pk
System Continuous
Stall Force
N (lb)
System Peak
Stall Current
A 0-pk
System Peak
Stall Force
N (lb)
Rated Output
230V AC
kW
Kinetix 5300 Drives
(230V AC input)
LDAT-S102010-DDx
…
LDAT-S102090-DDx
2.6 5.7
456 (103)
21.0
1289 (290)
0.96 2198-C1007-ERS
LDAT-S102010-EDx
…
LDAT-S102090-EDx
1.3 2.9 10.5 0.42 2198-C1004-ERS
LDAT-S103010-DDx
…
LDAT-S103090-DDx
2.7 8.6
702 (158)
31.5 1935 (435) 1.47
2198-C1015-ERS
(1)
(1) Rated peak stall-torque is specified with three-phase operation. To achieve rated peak stall-torque performance with single-phase operation, use a catalog number 2198-C1020-ERS.
LDAT-S103010-EDx
…
LDAT-S103090-EDx
0.9 2.9 10.5 1388 (312) 0.30 2198-C1004-ERS
LDAT-S104010-DDx
…
LDAT-S104090-DDx
2.7 11.5
929 (209)
42.0
2578 (580)
2.07 2198-C1020-ERS
LDAT-S104010-EDx
…
LDAT-S104090-EDx
1.3 5.7 21.0 0.86 2198-C1007-ERS
LDAT-S106010-DDx
…
LDAT-S106090-DDx
2.7 17.3
1403 (315)
63.0
3871 (870)
2.94 2198-C2030-ERS
LDAT-S106010-EDx
…
LDAT-S106090-EDx
1.3 8.6 31.5 1.28
2198-C1015-ERS
(1)